Electric Technology Experimental System Manufacturer,Supplier and Exporter in China
Product Code : EL-GLE-12183
Quick answer: The Electric Technology Experimental System is supplied by Science Lab Supplies as part of its General Lab Equipment range, manufactured and exported from Jining City, Shandong Province, China for schools, colleges and laboratory buyers.
The system can fulfill the lab exercises as follow:
1. Usage of instruments and calculation of measuring error
2. Instruments measuring error reduction
3. I-V characteristics plotting of linear & nonlinear circuit components
4. Potential & voltage measuring and potential diagram plotting
5. Proof of Kirchhoff's law and troubleshooting
6. Proof of superposition principle and troubleshooting
7. Equivalent transform between voltage source and current source
8. Proof of Thevenin theorem
9. Proof of Norton theorem
10. Two-port network
11. Proof of Reciprocity theorem
12. Research on controlled sources (VCVS, VCCS, CCVS and CCCS)
13. Observation and measurement of typical electrical signal
14. Response testing of first-order RC circuits
15. Response testing of second-order RC circuits
16. Impedance characteristics measurement of RLC components
17. Characteristics testing of RC series & parallel frequency selective network
18. Research on R LC series resonant circuits
19. AC circuit equivalent parameters measurement
20. Research on the phasor of sinusoidal steady-state AC circuits
21. Mutual induction
22. Characteristics testing of single-phase iron-core transformer
23. Voltage and current measurement of 3-phase AC circuits
24. Calibration of single-phase wattmeter
25. Measurement of power factor and phase sequence
Relay control of motor:
1. Jog and self-locking control of 3-phase asynchronous motor
2. Forward/reverse rotation of 3-phase asynchronous motor
3. Y-Δ reduced voltage control of 3-phase asynchronous motor
4. Energy-consuming braking control of 3-phase asynchronous motor
5. Starting sequence control of 3-phase asynchronous motor Worktable
6. Worktable automatic revolving cycle control
7. Control at two locations
8. Electrical control of lathe C620
9. Electric hoist electrical control circuit
Analog circuits:
1.Transistor common emitter amplifier
2.FET amplifier
3.Negative feedback amplifier
4.Emitter follower
5.Differential amplifier
6.Specification measurement of integrated op amp
7.Basic application of integrated op ampI -analog operational circuit
8.Basic application of integrated op ampII -signal processing (active filter)
9.Basic application of integrated op ampIII -signal processing(voltage comparator)
10.Basic application on integrated op ampIV -signal processing(waveform generator)
11.RC sine wave oscillator
12.LC sine wave oscillator
13.Assemble and commissioning of function signal generator
14.VCO(voltage controlled oscillator)
15.LF power amplifier I-OTL power amplifier
16.LF power amplifier II-integrated power amplifier
17.DC stabilized power supply I-series transistor stabilized power supply
18.DC stabilized power supply II-integrated voltage regulator
19.Controllable thyristor rectifier circuit
Digital circuits:
1. Connection and drive of integrated logic circuit
2. Design and commissioning of combinational logic circuit
3. Decoder & its application
4. Data selector & its application
5. Flip-flop & its application
6. Counter & its application
7. Shift register & its application
8. Pulse distributor & its application
9. Pulse signal generation using logic gates
10. Monostable flip-flop & Schmitt flip-flop
11. 555 timer & its application
12. D/A, A/D converter
What the Electric Technology Experimental System Is Used For
This general lab equipment item is supplied for use in schools, colleges and institutional laboratories, supporting practical instruction and demonstration in science and laboratory departments. It forms part of the wider General Lab Equipment catalogue from Science Lab Supplies.
Key Highlights
- Part of the General Lab Equipment range: Sold alongside related items from Science Lab Supplies' General Lab Equipment catalogue.
- Built for institutional use: Suited to repeated use in schools, colleges and institutional laboratories.
- Manufactured and export-packed in China: Produced at our Jining City, Shandong Province facility and packed for international freight.
- Available for bulk and tender orders: Individual, classroom-set and tender-quantity orders can be arranged via our export team.
Exact technical specifications, materials and certifications are manufacturer-stated and should be confirmed with our team before ordering; contact us for a current product datasheet.
Who Uses This
Schools, colleges, distributors and laboratory buyers choose the Electric Technology Experimental System to support science and laboratory departments, often ordering it alongside other items from the General Lab Equipment range when setting up or expanding a laboratory.
Serving Schools, Distributors and Tender Buyers Worldwide
Science Lab Supplies manufactures this equipment at its own in-house factory in Jining City, Shandong Province, China, rather than through trading agents, and exports to schools, colleges and laboratory distributors across Africa and other regions worldwide. Buyers sourcing lab equipment from Science Lab Supplies include institutions in countries such as Kenya, Philippines, Uzbekistan, Nepal, among many others. Many orders are tied to structured procurement programmes, including ADB (Asian Development Bank) tenders, Ministry of Technical Education tenders and World Bank-funded education projects. Our export team prepares tender-ready documentation, packing lists and product specification sheets for these bids on request via Contact Us.
Why Source This from Science Lab Supplies in China?
Science Lab Supplies manufactures general lab equipment equipment at scale from its Jining City, Shandong Province facility, giving schools, colleges, distributors and laboratory buyers access to competitive indicative FOB/CIF export pricing. As a China-based manufacturer and exporter, we quality-check units before dispatch and export-pack every order for international freight, with documentation support for institutional, distributor and tender-quantity orders.
Frequently Asked Questions
What is the Electric Technology Experimental System used for?
It is used in schools, colleges and institutional laboratories as part of the General Lab Equipment range from Science Lab Supplies.
Is this suitable for institutional or bulk orders?
Yes. Individual, classroom-set and tender-quantity orders can be arranged; contact our team to confirm current options.
Can I get a product datasheet or sample before a bulk order?
Yes. Contact our team via Contact Us to request a datasheet, sample unit, or indicative FOB/CIF quotation.
What other General Lab Equipment does Science Lab Supplies offer?
The General Lab Equipment range includes items such as MULTI-CHANNEL OPTICAL ANALYZER, MEASURING INSTRUMENT FOR LIQUID SPECIFIC HEAT OF VAPORIZATION, Soil pH, Moisture, Sunlight Meter.
Related Products
See also MULTI-CHANNEL OPTICAL ANALYZER, MEASURING INSTRUMENT FOR LIQUID SPECIFIC HEAT OF VAPORIZATION, Soil pH, Moisture, Sunlight Meter from the same General Lab Equipment range.
Related Categories
Browse related ranges: Electrochemistry Instruments, Research Equipment, Pathology and Laboratory Equipment.
Request a Quote or Catalogue
Contact our team via Contact Us for an indicative export quotation on the Electric Technology Experimental System, or browse the complete Product Catalogue.
